Zoltrix: ISDN drivers

SPEEDIER ISDN Terminal Adapter (8TA-ISDN128S)


	ISDN User Manual (150KB) Note: Encryption required from ISP before ISDN line connecting.	for reading the User's Manual in Adobe Acrobat 3.0 format



The file contains the latest Windows 95/98 drivers.

Windows 98/95Driver

Filename: win98.zip
Size: 62 KB
Date: Dec 2000

This file contains both the latest Windows 98 and Windows 95 driver

Installation instructions:

After downloading the file, run the winzip to unzip the files .Replace the your current driver with the unzipped files.
Refer to the Readme.txt to see the installation process instruction (This file will be found in the folder you unzipped the files to in step #1)


The file contains the latest Windows NT 4.0 drivers.

Windows NT 4.0 Driver

Filename: Nt40.zip

Size: 605 KB

Date: Dec 1999

After downloading the file, run the winzip to unzip the files .

Then run the setup.exe to install the driver

Refer to the Readme.txt to see the installation process instruction (This file will be found in the folder you unzipped the files to in step #1)


The file contains the latest Windows 2000 / XP drivers.

Windows 2000 / XP Driver

Filename: mbcapi_2k1.zip

Size: 98 KB

Date: Feb 20, 2001

After downloading the file, run winzip to unzip the file.

Then follow readme.txt file to install the driver under Windows® 2000 and XP. Below is the instructions steps for Window® XP for your first preview, which steps are the same as in readme.txt file.

For Windows XP CAPI 2.0 / NDIS WAN WDM Miniport installation:
-----------------------------------------------------------
1. First install the ISDN Adapter into your system's PCI slot and then power up the computer.
2. After Windows XP is booted, "Found New Hardware Wizard" will be displayed.
3. Click "Install from a list or specific location(Advance)
4. Click "Search for the best driver in these location" or browse to A:\WDM to install.
5. Click "Finish" after driver is installed.

When the above steps are finished, you have to install "Zoltrix NDIS WAN WDN Miniport" driver. Follow the steps below:
1. Go to System in the control panel.
2. Click Hardware tab. Click "Add Hardware" and "Next" to proceed.
3. Click "Yes, I have already connected the hardware"
4. Browse to the bottom of the scroll bar and select "Add new hardware".
5. Click "Install the hardware that I manually select from the list(Advance".
6. Select "Network Adapters" and click "Next".
7. Click "Have Disk"
8. Browse to A:\NDISWAN.2K. Click "Open" and "OK".
9. Select "Zoltrix NDIS WAN WDM Miniport" and click "Next".
10. Click "Continue Anyway" to install driver. Click "Finish" when done.

Installation is completed!


visits since October 12, 1999.