Model: 8FM-56KIACFVSP

Drivers, Manuals, System Requirements and Technical Specifications
 

	Click on the above icons to jump to drivers below	Picture of FMVSP56i3
	System Requirements ATi3 responses of this model PCB version and chip set Specifications User's Manual AT Command Manual Jumper Settings Model specific Q&A General 56K Q&A V.90 Q&A	for reading the User's Manual in Adobe Acrobat 5.0 format (self extracting Winzip file)

 

Click on the above icon to jump to past drivers versions below Windows 95/98 Driver Filename: 56i3-2310.exe Size: 344,923 bytes Date: 7-7-1999 The file contains both the Windows drivers and the Flash Com program which contains the Dual-Mode V.90/K56Flex V2.310 Flash ROM code Installation instructions:   After downloading the file, run the 56i3-2310.exe program (Click here to see a picture of the WinZip Self Extractor main screen). Select the folder or diskette to unzip the file to and then click the unzip button. (If you cannot locate the file you downloaded, use the Windows Find command to search for the 56i3-2310.exe program on your hard disk.) Refer to the readme.txt file included in the file for installation instructions to both update the models Flash ROM and also to remove the current Windows modem driver and install the new Windows modem driver. (This file will be found in the folder you unzipped the files to in step #1) Refer to the instructions in the users manual for more details.

 

Windows NT Driver Use Win 95/98 driver in NT 4.0.   Installation instructions:   After downloading the file, run the 56i3-2310.exe program (Click here to see a picture of the WinZip Self Extractor main screen). Select the folder or diskette to unzip the file to and then click the unzip button. (If you cannot locate the file you downloaded, use the Windows Find command to search for the 56i3-2310.exe program on your hard disk.) Refer to the readme.txt file included in the file for installation instructions. (This file will be found in the folder you unzipped the files to in step #1)  Note: Although the Windows 95/98 driver works with Windows NT 4.0, Zoltrix does not provide technical support for Windows NT including drivers and communication software bundled with the modem.

 

Windows 3.1x Driver No Driver required! Use the Flash Com program included with the Windows 95/98 driver to update the modems Flash ROM code.

 

Windows 2000 Beta Driver There is no support for this operating system at the current time and no expected release date. If and when a driver is released, it can be found on this page.

 

 

The FMVSP56i3 uses the same chip set as the FMVSP56i and FMVSP56i2. The FMVSP56i3 has a larger Flash ROM chip to simultaneously hold code that supports both V.90 and K56Flex (Dual-Mode) and requires a different Flash ROM program and Windows driver than the FMVSP56i and FMVSP56i2 models. Dual-Mode modems support both V.90 and K56 Flex. The modem automatically determines the remote modems protocol. The ATi3 and ATi6 responses change depending upon the code programmed into the Flash ROM. Modem ATi3 responses: (Starting from the newest version)   V2.310 022-001-K56_2M_DLP V2.210 022-001-K56_2M_DLP V2.200 022-001-K56_2M_DLP V2.100G 022-001-K56_2M_DLP V2.100 022-001-K56_2M_DLP Modem ATi6 responses: (Starting from the newest version)   RCV56DPF L8570A Rev 47.39/47.39 RCV56DPF L8570A Rev 47.32/47.32 RCV56DPF L8570A Rev 47.29/47.29 RCV56DPF L8570A Rev 47.24/47.24 Windows modem driver name: Zoltrix 56K Int Sp Phone (FMVSP56i3) Chip set Used:   Rockwell ACF 56K (2 Meg ROM) PrintedCircuitBoardVersion:   FM9784 (This board is used for the models FMVSP56i, FMVSP56i2 and FMVSP56i3)

Copyright@2000 Zoltrix International Limited

claims

visits since October 12, 1999.