Model: FMHCF56i

Drivers, Manuals, System Requirements and Technical Specifications
 

	Click on the above icons to jump to drivers below	Picture of FMHCF56i
	System Requirements PCB version and chip set Specifications User's Manual AT Command Manual General 56K Q&A V.90 Q&A	for reading the User's Manual in Adobe Acrobat 5.0 format (self extracting Winzip file)

Click on the above icon to jump to past drivers versions below Windows 95/98 Driver Filename: 21216401.zip Size: 742,000 bytes Date: 3-22-2000 The file contains the Windows 95/98 V.90/K56Flex Dual-Mode drivers (2.1.2.16.401) Installation instructions:   Use Winzip to unzip the file to remove the current driver and install the new driver.  Refer to the instructions in the users manual for more details. (Chinese users should download and copy this file hcfcsa.dll to the driver disk to replace the US version before installing the modem driver)

 

Click on the above icon to jump to past drivers versions below Windows NT 4.0 Driver Filename: hcfnt9.exe Size: 764,000 bytes Date: 23-3-2000 The file contains the latest Windows NT V.90/K56Flex Dual-Mode drivers. These drivers support voice mail and speakerphone features. This version operates with both the old Rockwell chips and the new Conexant chips. Make sure you read the readme.txt file for instructions to rename the inf file depending upon the chip used in the modem. Installation instructions:   After downloading the file, run the hcfnt9.exe program (Click here to see a picture of the WinZip Self Extractor main screen). Select the folder or diskette to unzip the file to and then click the unzip button. (If you cannot locate the file you downloaded, use the Windows Find command to search for the hcfnt9.exe program on your hard disk.) Refer to the readme.txt file included in the file for installation instructions. (This file will be found in the folder you unzipped the files to in step #1) Note: Although Zoltrix provides a Windows NT 4.0 driver, Zoltrix does not provide technical support for Windows NT including drivers and communication software bundled with the modem. These drivers should be used on a NT workstation only and not installed on a NT Server. Only hardware based modems should be used on an NT server.

 
 

Windows 2000  Driver Filename: hcf56-2000.exe Size: 781 KB Date: 5-4-2000 1. After downloading the file, run the hcf56-2000.exe program to unzip the files to an empty folder or directory on the hard drive. (If you cannot locate the file you downloaded, use the Windows Find command to search for the hcf56-2000.exe program on your hard disk.)  2. Refer to the readme.txt file included in the file for installation instructions. (This file will be found in the folder you unzipped the files to in step #1)

 

Linux Driver There is no support for this operating system at the current time and no expected release date. If and when a driver is released, it can be found on this page.

 

Windows 3.1x Driver No Support for this OS

 

 

This model is a software WinModem that is a Dual-Mode modem that supports both V.90 and K56 Flex and automatically determines the remote modems protocol. Windows modem driver name: (Starting from the newest version) Conexant HCF 56K Speakerphone PCI Modem Rockwell HCF 56K Speakerphone PCI Modem Conexant HCF 56K Data Fax Speakerphone PCI Modem Chip set Used: Rockwell or Conexant HCF 56K PrintedCircuitBoard Version: FM-5668 (This board is used for the models FMHCF56i and FMSFT56i) RCVDL56DPGL/SP (This is printed on the smaller of the two Rockwell chips) or FM-5687 (This board is used for the models FMHCF56i and FMSFT56i) RH56D/SP-PCI (This is printed on the one Conexant chip

Copyright@2000 Zoltrix International Limited

 
 
 
 
 
 
 
 

claims

visits since October 12, 1999.