Model: FMHSP56p

Drivers, Manuals, System Requirements and Technical Specifications
 

	Click on the above icons to jump to drivers below	Picture of FMHSP56p
	System Requirements ATi3 responses of this model PCB version and chip set Specifications User's Manual AT Command Manual Model specific Q&A General 56K Q&A V.90 Q&A	for reading the User's Manual in Adobe Acrobat 3.0 format (self extracting Winzip file)

 

Click on the above icon to jump to past drivers versions below Windows 95/98 Driver Dual-Mode modems support both V.90 and K56 Flex. The modem automatically determines the remote modems protocol.   Filename: pt764-9i.exe Size: 903,053 Date: 6-3-1999 The file contains the Windows 95/98 V.90/K56Flex Dual-Mode drivers intended for all Pentium class CPU's. The driver will automatically determine the CPU and install the correct driver. The ATi3 response will indicate the CPU type. (PCtel 7.64-9MI-S or PCtel 7.64-9MI-MS or PCtel 7.64-9MI-NS) Installation instructions:   After downloading the file, run the pt764-9i.exe program (Click here to see a picture of the WinZip Self Extractor main screen). Select the folder or diskette to unzip the file to and then click the unzip button. (If you cannot locate the file you downloaded, use the Windows Find command to search for the pt764-9i.exe program on your hard disk.)  Refer to the readme.txt file included in the file for installation instructions to remove the current driver and install the new driver. (This file will be found in the folder you unzipped the files to in step #1) Refer to the instructions in the users manual for more details.

 

Click on the above icon to jump to past drivers versions below Windows NT 4.0 Driver The Driver used in Windows NT must match the CPU type correctly. You will find drivers for Pentium CPU's, and systems of any CPU type that support MMX. If your CPU supports MMX, use the MMX driver. MMX CPU's   Filename: pt764-9m.exe Size: 637,922 Date: 6-3-1999 The file contains the Windows NT V.90/K56Flex Dual-Mode drivers intended for Pentium CPU's MMX. If your CPU does not support MMX, you can use the Past Driver versions below: Installation instructions:   After downloading the file, run the pt764m.exe program (Click here to see a picture of the WinZip Self Extractor main screen). Select the folder or diskette to unzip the file to and then click the unzip button. (If you cannot locate the file you downloaded, use the Windows Find command to search for the pt764m.exe program on your hard disk.) Refer to the readme.txt file included in the file for installation instructions. (This file will be found in the folder you unzipped the files to in step #1) After installing the modem driver  Go to Dial-Up Networking \ More \ Edit entry and modem properties \ Security then select "Accept any authentication including clear text" Note: Although Zoltrix provides a Windows NT 4.0 driver, Zoltrix does not provide technical support for Windows NT including drivers and communication software bundled with the modem. These drivers should be used on a NT workstation only and not installed on a NT Server. Only hardware based modems should be used on an NT server.

 

Windows 3.1x Driver No Support for this OS

 

Linux Driver There is no support for this operating system at the current time and no expected release date. If and when a driver is released, it can be found on this page.

 

 

This model is a software WinModem that depending upon the Windows driver installed, supports either K56Flex or is a Dual-Mode modem that supports both V.90 and K56 Flex and automatically determines the remote modems protocol. The ATi3 response changes depending upon the Windows software driver that is installed and the CPU used. FMHSP56i is NOT the correct item number for the 56K HSP modem. This was incorrectly printed on some boxes. FMHSP56p is the correct model #. Modem ATi3 responses: (Starting from the newest version) Intel Pentium CPU's     The following responses indicate that a Dual-Mode V.90/K56 Flex Windows driver is installed PCtel 7.64-9MI-S PCtel 7.64-9MF-S PCtel 7.55S PCtel 7.54S The following responses indicate that a K56 Flex Windows driver is installed PCtel 3.5202S PCtel 3.5.110S PCtel 3.5104S MMX CPU's (of all types!) The following responses indicate that a Dual-Mode V.90/K56 Flex Windows driver is installed   PCtel 7.64-9MI-MS PCtel 7.64-9MF-MS PCtel 7.55MS PCtel 7.54MS The following responses indicate that a K56 Flex Windows driver is installed PCtel 3.5202S PCtel 3.5.110MS PCtel 3.5104MS Cyrix 6x86 CPU's The following responses indicate that a Dual-Mode V.90/K56 Flex Windows driver is installed   PCtel 7.64-9MI-NS PCtel 7.64-9MF-NS PCtel 7.55NS PCtel 7.54NS The following responses indicate that a K56 Flex Windows driver is installed PCtel 3.5202S PCtel 3.5.110NS PCtel 3.5104NS Windows modem driver name: (Starting from the newest version)   V.90 K56Flex HSP PNP Modem HSP K56FLEX PNP MODEM Chip set Used:   PCtel 388pnp 56,000bps PrintedCircuitBoard Version:   FM9628 Rev 2.0 (This board is used for the models FMHSP336p and FMHSP56p) PCT388P (This is printed on the one PCtel chip)

388P.EXE PnP data file

If your PnP modem is not being recognized by your motherboard, run the bat file included in this file from DOS mode to reload the modems PnP data.

Copyright@2000 Zoltrix International Limited

claims

visits since October 12, 1999.