FM336Fi Specifications

Model: FM336Fi

Drivers, Manuals, System Requirements and Technical Specifications

System Requirements
IBM PC/386, 486, Pentium or faster compatible computer with the following:

One free 16-bit slot
One or more 3.5" floppy drives or CD-ROM drive for software installation
MGA, CGA, EGA or VGA
4 MB RAM for Win 3.1
8 MB RAM for Win 95/98
Hard disk with at least 8 MB of free disk space
Optional Microsoft or compatible serial mouse
MS-DOS 3.3 or later and Windows 3.1 or Windows 95/98

Chip set Used:
Rockwell ACF 33,600

Technical Specifications

Data throughput up to 115,200 bps
Modem Operating Modes

V.34+ 33,600/31,200 bps

V.34 28,800/26,400/24,000/21,600/19,200/16,800 bps

V.32bis 14,400/12,000/7,200 bps

V.32 9,600/4,800 bps

V.22bis 2,400 bps

V.22 & Bell 212A 1,200 bps

V.21 & Bell 103 300 bps

Fax Send and Receive rates up to 14,400 bps
Fax Operating Modes

V.29 & V.27ter & V.17 Fax Transmission 14,400/9600 send and receive;
Group III Send and Receive fax compatible
V.42 & MNP 4 Hardware based Error Correction
V.42bis(4-1) & MNP 5(2-1) Hardware based Data Compression
Integrated 16550 UART for High Speed Operation
Enhanced AT Command set
Supports Class 1 fax software
Line quality receive level monitoring
NVRAM directory stored profiles
Programmable speaker volume control
Flow Control (XON/XOFF, RTS/CTS)
Speed Buffering
Automatic Format/Speed Sensing
Asynchronous Operation V.21, V.22, V.22bis, V.32, V.32bis, V.34, V.34+ Half/Full Duplex
Supports Com1-Com4 (Selectable with jumpers)
Supports IRQ's 3,4,5,7,9,10,11,12,15 (Selectable with jumpers)